Toronto & GTA
Tile Installation Toronto
Tile only performs as well as what's underneath it. Our tile installation work in Toronto and across the GTA starts with proper substrate preparation and waterproofing — not just a flat surface and a level — because that's what determines whether a shower surround lasts two years or twenty. We install floor tile, wall tile, shower surrounds, kitchen backsplashes, and feature walls across condos, houses, and townhomes throughout the city.
By room
Tiling for every space in your home
Whatever room you're tiling, the fundamentals are the same — flat, properly prepped substrate, the right waterproofing where it's needed, and clean, precise layout. Here's how it breaks down by space.
Bathroom & Shower Tile
Shower surrounds, tub surrounds, floors, and niches — the highest-stakes tile work in the house, and where waterproofing matters most.
Kitchen Backsplash & Floor Tile
From a classic subway backsplash to large-format porcelain floors that handle daily traffic.
Feature Walls & Fireplace Surrounds
Natural stone, large-format porcelain, and accent walls that become the focal point of a room.
Floor Tile (Any Room)
Entryways, mudrooms, basements — durable, water-resistant flooring wherever it's needed.
Why substrate prep is the part you don't see — and the part that matters most
Most tile problems aren't tile problems — they're substrate problems that show up months or years later as cracked grout, lifted tiles, or a leak behind the wall. Before any tile goes down, we check the substrate for flatness, address any unevenness with self-leveling compound where needed, and confirm the surface can actually support the tile format you've chosen — large-format porcelain in particular demands a near-perfectly flat base.
over 10 ft (industry standard)
In wet areas — showers, tub surrounds, and any floor near water — a waterproofing membrane goes on before the tile, not as an afterthought. This is the layer that keeps water inside your bathroom instead of finding your subfloor, your neighbour's ceiling (in a condo), or the framing behind your wall.
Flatness & leveling
Self-leveling compound where the substrate doesn't meet tolerance, especially critical under large-format tile.
Waterproof membrane
Applied in all wet areas before tile, sealed at every seam and corner.
Proper backer board
Cement board or equivalent in wet zones — never tiling directly over drywall in a shower.
Old tile removal
Full demolition and substrate inspection when tiling over existing tile isn't a safe option.
The finish is only as good as the prep
Bathroom & shower tile installation
Bathroom tile installation in Toronto homes and condos starts with the most technically demanding tile work in the house — shower and tub surrounds, with sloped floors for drainage, waterproofing at every seam, and precise cuts around fixtures and niches. We install shower surrounds, tub surrounds, bathroom floors, and shower niches across Toronto homes and condos, with a waterproofing membrane behind every wet-area installation and a flood test before grout goes in on shower pans.
For condo bathrooms specifically, we also handle the building-side logistics — elevator booking, insurance certificates, and board approval — as part of the job. See our condo bathroom renovation page.
- Shower surrounds & tub surrounds
- Bathroom floor tile (heated floor option available)
- Shower niches & benches
- Slip-resistant floor tile selection
Kitchen backsplash & floor tile
Kitchen backsplash installation in Toronto is one of the highest-impact, lowest-disruption renovations you can do — and one of the most detail-sensitive, since every cut has to work around outlets, switches, and cabinet lines. We install classic subway backsplashes, herringbone patterns, and large-format slab backsplashes, along with durable kitchen and entryway floor tile that holds up to daily foot traffic and spills.
- Subway, herringbone & mosaic backsplash patterns
- Large-format porcelain kitchen floors
- Tile around outlets, switches & cabinetry
- Heated floor tile installation
Feature walls & fireplace surrounds
An accent wall or fireplace surround is where tile becomes the focal point of the room, not just a functional surface. We work with natural stone, large-format porcelain slabs, and textured or 3D tile to build feature walls and fireplace surrounds that anchor a living room, entryway, or bedroom — precisely cut and set for clean sightlines and minimal grout lines.
- Natural stone feature walls (marble, travertine, slate)
- Fireplace surrounds
- Large-format slab accent walls
- Textured & 3D tile
Floor tile installation for any room
Floor tile installation in Toronto homes stands up where other flooring struggles — entryways, mudrooms, and basements that see grit, moisture, and heavy foot traffic. We set durable, water-resistant floor tile that's easy to clean and built to last, from standard porcelain up to large-format formats with fewer grout lines.
- Entryway & mudroom floor tile
- Basement floor tile
- Large-format & porcelain floor options
- Tile over radiant heat where applicable
Tile types we install
We work with the full range of tile materials for Toronto and GTA homes, and can help you choose the right one for your room, budget, and how the space gets used.
Ceramic tile
The most budget-friendly option, well-suited to low-traffic floors and walls.
Porcelain tile
Denser and more water-resistant than ceramic, the standard choice for bathrooms, kitchens, and high-traffic floors. Available from standard formats up to large-format slabs — a common choice for porcelain tile installation across Toronto and the GTA.
Large-format porcelain
24″×24″ and up — fewer grout lines and a cleaner, modern look. Requires a near-perfectly flat substrate, which is where proper prep matters most.
Natural stone
Marble, travertine, slate — a premium option for feature walls, floors, and high-end bathrooms, with more involved sealing and maintenance than porcelain.
Glass & mosaic tile
Common for shower niches, backsplashes, and accent details where a smaller format or reflective finish is wanted.
Subway tile
The classic, versatile choice for kitchen backsplashes and bathroom walls.
Tile installation cost in Toronto
Tile installation cost in Toronto and the GTA depends mainly on the tile material, the room, and how much substrate prep and waterproofing the space needs. As a general benchmark, installed tile in the GTA typically runs $9–$45+ per square foot depending on material — wet areas and complex patterns sit at the higher end due to waterproofing and precision-cutting time. The ranges below are planning estimates before HST; your fixed price is confirmed after we see the space.
One fixed price covers materials, labour, waterproofing, and cleanup — not a list of separate line items to add up yourself.
Cost by tile material
| Tile type | Installed / sq ft |
|---|---|
| Ceramic tileBudget-friendly, best for low-traffic floors & walls | $9 – $15 |
| Porcelain tile (standard format)Most common choice for GTA bathrooms & kitchens | $14 – $22 |
| Large-format porcelain (24″+)Requires a near-perfectly flat substrate; fewer grout lines | $18 – $28 |
| Natural stone (marble, travertine, slate)Premium feature walls, floors & high-end bathrooms | $22 – $45+ |
| Glass & mosaic tileCommon in niches, backsplashes & accent details | $20 – $35 |
Cost by project type
| Project | Estimated cost |
|---|---|
| Kitchen backsplash30–40 sq ft | $900 – $1,800 |
| Bathroom floor40–60 sq ft | $1,300 – $2,400 |
| Shower/tub surround (incl. waterproofing)60–100 sq ft | $4,500 – $8,000 |
| Kitchen or entryway floor150–250 sq ft | $3,500 – $8,000 |
| Feature wall / fireplace surround30–80 sq ft | $2,000 – $5,500 |
Prices are planning ranges before HST and subject to change. Your fixed, itemized price is confirmed after a site visit.
Smaller projects carry proportionally higher per-square-foot costs, since setup, precision cutting, and minimum visit costs don't shrink with the room.
What drives cost within each range
- Waterproofing membrane in wet areas (required for showers, adds labour)
- Pattern complexity — herringbone and diagonal layouts add roughly 15–25% to labour
- Substrate condition — self-leveling compound where the existing surface isn't flat
- Old tile removal, where applicable — standard single-layer demo is included; removal of multiple layers, embedded adhesive, or hazardous material is quoted separately
- Heated floor systems — adds roughly $8–12/sq ft where installed under tile
- Tile format — large-format and natural stone require more careful handling and setting time
Same project, two price points
Take a bathroom floor. The material and pattern you choose are what move it across the range.
Lower end of the range
- Standard-format ceramic or porcelain tile
- Simple straight or grid layout
- Standard grout
Higher end of the range
- Large-format porcelain or natural stone
- Herringbone or diagonal pattern
- Premium grout and sealant
What's not included
A few things sit outside the quoted ranges because they vary too much to price before we see the space — these are quoted separately:
- Removal/disposal of existing flooring beyond standard tile demo
- Structural subfloor repair
- Electrical or plumbing relocation to accommodate a new layout
If we find something behind the wall
Our tile installation process
From the first measurement to the final joint, here's how a tile installation runs across Toronto and the GTA.
Free site visit & quote
We measure the space, assess the substrate, and give you a fixed, itemized price.
Material selection
Choose your tile, pattern, and grout — we can advise based on the room and how it's used.
Prep & waterproofing
Substrate leveling and, in wet areas, a full waterproofing membrane before any tile is set.
Tile setting & grouting
Precise layout, cutting, and setting, with attention to lippage and consistent grout lines.
Final walkthrough
We check every line and joint with you before calling the job done.
Request your tiling quote
Recent tile projects
A sample of recent tile work across Toronto and the GTA — bathrooms, kitchens, and feature walls.
BathroomWalk-in shower surround, Downtown Toronto condo
Large-format porcelain surround with full waterproofing membrane and a flood-tested shower pan.
BathroomHeated bathroom floor, North York
Porcelain floor tile set over a radiant heat system for a warm, slip-resistant finish.
KitchenSubway backsplash, Etobicoke
Classic subway backsplash cut cleanly around outlets, switches, and cabinet lines.
KitchenLarge-format porcelain floor, Mississauga
Durable large-format porcelain kitchen floor with minimal grout lines and a flat, level base.
Feature wallNatural stone fireplace surround, Midtown Toronto
Precisely cut natural stone fireplace surround set for clean sightlines and minimal grout lines.
Feature wallLarge-format slab accent wall, Vaughan
Large-format porcelain slab accent wall as the focal point of a living room.
Areas of Service
Making homes & offices better all over Toronto
We're based in central Toronto, but our handymen service most areas of the GTA.
Frequently asked questions
Looking for a tile contractor in Toronto?
Book a free site visit. We'll assess your space, walk through tile options, and give you a fixed, itemized price — with substrate prep and waterproofing handled properly from the start.
Book a Free QuoteLicensed & insured · WSIB-covered · $2M liability · 2–5 year workmanship warranty